HVAC · Electrical · Sydney & NSW
Every building breathes. We keep it that way.
Design, installation, maintenance and 24/7 response for commercial HVAC and electrical systems across NSW.
- 24/7 breakdown
- Daikin authorised partner
- NSW licence 386056C
- ARCtick AU56914
- 10 services
- 4 sectors
Services
Complete care for your plant
From full HVAC design and construction to compliance testing and reactive repairs.
-
HVAC Design & Construction
Mechanical services design and installation for new builds and fit-outs — from load calculations to commissioning.
Learn more -
BMS & Controls
Building management system and HVAC controls design, installation, integration and optimisation.
Learn more -
Planned Preventative Maintenance
Scheduled maintenance programs that keep HVAC and mechanical plant reliable, compliant and efficient.
Learn more -
Reactive & Breakdown Service
Rapid response to HVAC and mechanical faults, with 24/7 emergency breakdown cover.
Learn more -
System Upgrades & Retrofits
Upgrading and retrofitting ageing HVAC plant to improve efficiency, comfort and compliance.
Learn more -
Air Quality Testing
Indoor air quality assessment and testing to support healthy, compliant building environments.
Learn more -
Fire Damper Inspection
Inspection and testing of fire and smoke dampers to support building fire safety compliance.
Learn more -
Dilapidation Reports
Documented condition assessments of mechanical services and plant, before or after works.
Learn more -
Electrical Installation & Maintenance
Commercial electrical installation and ongoing maintenance, alongside Habitat's mechanical services.
Learn more -
Electrical Testing & Compliance
Electrical testing, inspection and compliance support to keep installations safe and certified.
Learn more -
Not sure which service you need?
Tell us what's happening with your plant or switchboard and we'll point you in the right direction.
What's your building telling you?
Pick the sign you're seeing. We'll tell you how urgent it is, what's usually behind it, and who to send.
Act today
Not cooling or heating
Act today
Water leaking from a unit
Book this week
Noisy, rattling or buzzing
Book this week
BMS alarm or plant faults
Act today
Power keeps tripping
Plan it in
Stuffy air or odours
Book this week
Sneezing, itchy eyes or dusty air
What's usually behind it
Usually a refrigerant leak, a failed compressor or fan, a tripped circuit or a controls fault.
While you wait
- Check the thermostat or BMS setpoint
- Look for a tripped breaker on the unit
- Don't keep resetting it — call us
What's usually behind it
Most often a blocked condensate drain or a frozen coil. Water near electrics is a safety risk.
While you wait
- Switch the unit off at the isolator
- Move anything electrical away
- Put a bucket down and call us
What's usually behind it
Worn fan bearings, loose panels, a failing motor or a struggling compressor.
While you wait
- Note when it happens and where
- Keep it running if it's cooling normally
- Book a technician before it fails
What's usually behind it
Sensor drift, a failed actuator, flow faults or programming that no longer suits the building.
While you wait
- Screenshot the alarm list
- Note any rooms running hot or cold
- Our controls team can check remotely first
What's usually behind it
A faulty RCD, a failing motor or a wiring fault. Tripping is the system protecting itself.
While you wait
- Don't keep resetting the breaker
- Note which circuit trips
- Call our electrical team
What's usually behind it
Dirty filters, low fresh air, or mould in drains and ductwork.
While you wait
- Note which areas feel worst
- Check when filters were last changed
- Ask about an indoor air quality test
What's usually behind it
Often clogged or overdue filters, dusty ductwork or dirty coils spreading dust and allergens around the building.
While you wait
- Note when and where it's worst
- Check when filters were last changed
- Book a filter change and coil clean
Recommended: Reactive & Breakdown
Recommended: Reactive & Breakdown
Recommended: Planned Preventative Maintenance
Recommended: BMS & Controls
Recommended: Electrical Testing & Compliance
Recommended: Air Quality Testing
Recommended: Planned Preventative Maintenance
A general guide only. For anything electrical or water near power, switch off at the isolator and call a licensed technician.
- Hour response
- 24 /7
- Specialist services
- 10
- ISO certifications
- 3
- Sectors
- 4
Sectors
Sectors we serve
-
Commercial
Offices, warehouses and commercial buildings that need reliable climate control and efficient plant.
-
Retail
Shops and retail spaces where comfortable conditions matter for customers and staff alike.
-
Aged Care
Aged care facilities with strict comfort, air quality and reliability requirements.
-
Healthcare
Healthcare environments where air quality, filtration and system uptime are critical.
Certifications
Trusted standards
Independently certified management systems and a licensed NSW contractor.
-
ISO 9001:2015
Quality
- Certified by
- IQC · JAS-ANZ
- Certificate
- R1/1492
-
ISO 14001:2015
Environment
- Certified by
- IQC · JAS-ANZ
- Certificate
- R1/0624
-
ISO 45001:2018
Health and safety
- Certified by
- IQC · JAS-ANZ
- Certificate
- R1/0682
-
NSW licence
Licensed contractor
- Licence no.
- 386056C
- Issued by
- NSW Government
-
ARCtick
Refrigerant authorisation
- Licence no.
- AU56914
- Issued by
- ARC
Trusted by Sydney businesses
Facility managers, property groups and aged care providers who trust us with their buildings.
- BGIS
- Knight Frank
- CBRE
- SummitCare
- Excel Building Management
- World Tower
- Daikin